Do Plan the Layout: Measure the space carefully and plan the tile arrangement to minimize cuts and ensure symmetry.
Do Use the Right Mortar: Use a high-quality thin-set mortar designed for large-format tiles to ensure strong adhesion. We prefer Laticrete products (https://www.laticrete.com/en/our-products/tile-and-stone-installation/tile-and-stone-adhesives)
Do Back Butter the Tiles: Apply mortar to both the floor and the back of the tile (back buttering) to prevent voids and ensure a solid bond.
Do Use a Tile Leveling System: Use a leveling system to maintain consistent tile height and avoid lippage.
Do Maintain Even Grout Lines: Use tile spacers to ensure consistent grout lines and proper alignment.
Do Work in Small Sections: Spread mortar in small sections at a time to prevent it from drying before tiles are placed.
Do Ensure the Surface is Level and Smooth: Verify the surface is clean, flat, and smooth before starting installation for better tile adhesion.
Do Allow Proper Drying Time: Let the mortar and grout fully set before walking on or using the space.

Don’t Skip Surface Preparation: Never install tiles on an uneven or dirty surface. Preparation is key to a successful installation.
Don’t Rush the Process: Take your time to ensure each tile is placed correctly. Rushing may lead to uneven tiles and mistakes.
Don’t Ignore Tile Lippage: Ensure tiles are level and avoid shifting them once placed. Use a leveling system to reduce lippage (height differences).
Don’t Walk on Wet Tiles: Avoid walking on tiles before the adhesive has set to prevent shifting or misalignment.
Don’t Use Too Much Mortar: Don’t apply excessive mortar; it can cause tiles to shift or become uneven.
Don’t Forget Expansion Joints: Leave space for expansion joints around the perimeter to allow for natural movement.
Don’t Install in Extreme Conditions: Avoid installing tiles in extremely high or low temperatures, or in high humidity, as this can affect mortar and grout setting.
Don’t Grout Too Soon: Wait until the mortar has fully cured before grouting to ensure the tiles remain secure.
Don’t Forget to Check for Flatness: Ensure the floor or wall is level before installation to avoid visual defects once the tiles are laid.